Based deck oil-Stain

Wide ranges of products for coating deck are available. There are four major categories of deck coatings: oil-based, alkyd oil-based, modified alkyd and acrylic/latex. Traditional oil based coats are still popular and widely used. Oil-based coatings offer excellent penetration, absorption and adhesion properties for wood. Lower quality formulations can be less resistant to mold and mildew and they lack durability too. Alkyd oil coatings are an improvement in oil-based coating with the addition of synthetic resins. These coatings are highly permeable and durable.

Acrylic/latex products are water-based coats that over a time wash away with soap and water. They have fewer odors and dry quickly. Drying too quickly lead to problems in adhesion to woods surface. Water-based coatings are also not very highly water repellent. If water penetrates wood it can cause permanent damage.

Benefits of Oil based Stain:
1. Linseed and Tung oil formula has excellent penetration properties.
2. Mildew resistant coating
3. Excellent UV reflecting properties, great for high altitude application
4. Water Repellant
5. Allows wood to breathe.
6. Brings back the natural luster of wood.

Preparation and Application of Stain

If any areas of the deck have started to splinter or crack scrub thoroughly with sand paper to remove any dead wood fibers and till new layer of wood is visible.
1. Clean surface thoroughly with soap and water or with high-pressure washer or sprayer.
2. Allow the surface to dry completely before coating with oil based stain. Wait at least for 24hrs before coating. If stained while the deck is still wet, the oil won't penetrate the wood. The stain will just penetrate the surface, instead of seeping in.
3. Immerse a brush (use a 4-inch brush) or long-handled roller into the stain. Absorb only enough stain for a few strokes. If possible, use a roller to first apply the stain, and then apply into the wood with brush. Use a paintbrush for difficult-to-reach places.
4. Wipe excess stain with duster.
5. Avoid staining at midday or in direct sunlight. Do not stain deck in extreme weather condition such as hot, cold or if windy.
6. If a second coat required wait for 4 hrs between applications.
7. Wait for 24hrs before using Deck.

Warning
Oil-based stains can be irritating to eyes, skin, nose, and throat. Can cause headaches, dizziness, nausea, fatigue. Ingestion may cause vomiting.

Recommended Reading

1. Sikkens deck stain:
Creating a Competitive Edge: The deck surface is one of the most demanding areas to maintain as because of the...
2. Wood Deck Stain -
Introduction - Wood Decks are always exposed to severe weather conditions and longer periods of exposure may lead to shrinking...
3. Applying Deck Stain:Spruce up Your Deck
Deck is a porch that resembles the deck on a ship. Ultra violet rays from sun, debris and water damages...
4. Cabot Deck Stain: Here's an end to all Deck hassles
To have a clean and neat home is something that all will want. Exterior living has become very popular especially...
5. TWP Deck Stain: The Perfect Choice To Solve Exterior Wood Problems
TWP Deck Stain, means Total Wood Deck Stain. This is a product, which helps preserve and protect exterior wood decks....